How to Measure Your Horse for Flex Hoof Boots

Accurate hoof measurements make choosing Flex Boots easier. Start shortly after a fresh trim, measure each hoof individually and use the results to compare shell sizes. Measurements narrow the choices; a fitting check confirms whether the shape suits your horse.

What you will need

  • A ruler or measuring tape marked in millimetres.
  • A hoof pick and a clean, well-lit area.
  • A phone or camera and a note of which hoof you are measuring.
  • A safe handler if you need help holding the hoof or taking photos.

1. Clean and identify the hoof

Thoroughly pick out the hooves with a pick, then scrub with a wire brush, so the hoof edges and heels are clearly visible. Record whether you are measuring the left front, right front, left hind or right hind. Never assume all four feet have the same shape or dimensions.

2. Measure the width

Measure straight across the widest part of the hoof. Keep the ruler level across the sole rather than following its curve, and keep it perpendicular to the frog. Read the result in millimetres and write it down for that hoof (better yet, take a photo).

3. Measure the length

Measure from the centre of the toe straight back to the back edge of the heels. Make sure the measuring tape is straight, in line with the frog. Ensure the 0 on the tape is at the toe. Do not include the soft heel bulbs. If the heel reference point is unclear, take a clear sole photo with the measuring tape in place and ask for help rather than estimating.

4. Take photos that are useful for fitting

Take a straight-on photo of the sole with the full hoof and measuring tape visible. Keep the camera square to the sole: an angled photo can distort the apparent proportions. Add front and side photos with the hoof bearing weight on level ground. Keep each photo labelled with the hoof it shows.

5. Compare shape as well as size

Use our Flex Boots size chart and fitting guide for the current dimensions. Classic shells are longer than they are wide; Wide shells have equal inside length and width. Do not automatically move up a size to compensate for a mismatch in shape.

If a measurement sits between sizes, the hoof has an unusual outline or the two front hooves differ, contact us with your measurements and photos before ordering.

Common measuring mistakes

  • Measuring a hoof that is overdue for its usual trim.
  • Including the heel bulbs in the hoof length.
  • Reading centimetres as millimetres or rounding measurements too early.
  • Taking angled photos or covering the hoof edges with the ruler.
  • Using one hoof’s measurement for every boot.

Try the fit before riding

Our Flex Fit Kit hire lets you compare sizing shells on your horse. Fitting shells are for checking fit, not riding. You can also find an approved fitter for hands-on help.

Ready to compare models? Browse Flex Hoof Boots in Australia and use your measurements alongside the product details.